The operation instructions of the blower

1：Transport medium inlet steam temperature is usually not more than 40 ℃.

2：The content of particles in the medium shall not exceed 100mg/m3，The maximum size of the particle shall not exceed half of the minimum work clearance.

3：Running in the bearing temperature is not higher than 95 ℃，Lubricating oil temperature is not higher than 65 ℃.

4：Pressure cannot be higher than the range of pressure specified on the nameplate.

5：Roots blower impeller and casing，Impeller and side plate，The impeller and impeller clearance have been adjusted when they leave the factory，Make sure there are gaps when reassembling.

6：The rotz blower runs, main fuel tank, The oil level of the drop tank must be between two red lines in the oil level

contact:

Name：Alisa Chen
Tel:  86 531 83216898  
Fax: 86 531 83216898 

Skype: +86 13853738666

E-mail:  dacheng@chinadicheng.com